Ruggedized external 5G/LTE, Wi-Fi and GNSS antennas and industrial DIN-rail power supply units for the FortiGate Rugged series. Waterproof, wide-temperature and vibration-tolerant hardware built for vehicles, outdoor cabinets and OT edge sites.
IP67 to IP69K / IK10 rated, RoHS and REACH compliant, and rated for extreme heat, cold and vibration.
Wide-band 5G/4G LTE MIMO with GPS, GLONASS, BeiDou and Galileo positioning for global deployments.
CB-certified TS35 DIN-rail supplies with universal AC/DC input, -40 C cold start and up to 60 C operation.
Fortinet Select Partner. Genuine parts, quoted and delivered fast for Canadian OT and edge projects.
These IP67 to IP69K antennas optimize wireless coverage for the cellular FortiGate Rugged appliances (the -3G4G, -5G and -5G-DUAL models). Round housings suit vehicle rooftops; rectangular IK-rated housings suit fixed outdoor and industrial mounts. All are made to order — request a quote and we confirm the exact part and lead time for Canada.
Compact three-in-one 5G/LTE + GNSS roof or fixed-mount antenna for cellular rugged appliances.
Fits FortiGate Rugged: FGR-60F-3G4G, FGR-70F-3G4G
Four-stream 5G/LTE MIMO plus GNSS in a low-profile round housing for vehicle and outdoor installs.
Fits FortiGate Rugged: FGR-50G-5G, FGR-70G-5G-DUAL
Adds dual Wi-Fi to the four-stream 5G/LTE + GNSS round antenna for combined cellular and Wi-Fi edge sites.
For FortiExtender / FortiWiFi cellular models
Four-stream 5G/LTE + GNSS in a hardened IP69K / IK10 rectangular housing for the harshest deployments.
Fits FortiGate Rugged: FGR-50G-5G, FGR-70G-5G-DUAL
Dual Wi-Fi plus four-stream 5G/LTE + GNSS in the toughest IP69K / IK10 rectangular form factor.
For FortiExtender / FortiWiFi cellular models
Eight-stream 5G/LTE MIMO plus GNSS for dual-modem rugged gateways such as the FGR-70G-5G-DUAL.
Fits FortiGate Rugged: FGR-70G-5G-DUAL
Maximum-density antenna: eight 5G/LTE streams, dual Wi-Fi and GNSS for multi-radio rugged edge deployments.
For FortiExtender / FortiWiFi cellular models
No antennas match that filter. Ask us for the right part.
Compatibility for the cellular FortiGate Rugged appliances, per the Fortinet Rugged Accessories datasheet. The FGR-70G-5G-DUAL uses two antennas (one GNSS element is unused when pairing 5-in-1 units). Base non-cellular models (FGR-60F, FGR-70F, FGR-70G) use internal radios and need no external antenna.
| FortiGate Rugged model | 3IN1-RND | 5IN1-RND | 5IN1-RCT | 9IN1-RCT |
|---|---|---|---|---|
| FortiGate Rugged 60F-3G4G | — | — | — | |
| FortiGate Rugged 70F-3G4G | — | — | — | |
| FortiGate Rugged 50G-5G | — | — | ||
| FortiGate Rugged 70G-5G-DUAL | — |
Note: a separation of at least 46 cm / 18 in is recommended when using dual round antennas.
Ultra-slim, convection-cooled DIN-rail supplies designed to power the FortiGate Rugged and FortiSwitch Rugged series in harsh environments. CB-certified for worldwide use, with universal AC/DC input, conformal coating against dust, and full electrical protection. Sold as a pack of 2 units.
Ultra-slim convection-cooled 240 W supply for a single FortiGate Rugged or FortiSwitch Rugged appliance.
Higher-capacity 480 W supply for PoE FortiSwitch Rugged models or multiple rugged appliances on one rail.
Both the 240 W and 480 W units are compatible with the full FortiGate Rugged line. Choose the 480 W unit for PoE FortiSwitch Rugged models or to power multiple appliances from one rail.
Match the accessory to where the appliance lives and what radios it carries. Unsure? Send us your FortiGate Rugged model and we confirm the exact antenna and power supply.
Round antennas mount cleanly on vehicle rooftops and poles. Rectangular IK-rated housings (IP69K / IK10) are built for fixed outdoor and industrial surfaces where impact resistance matters most.
Match the antenna to the appliance radio: single-modem models use 3-in-1 or 5-in-1 antennas; the dual-modem FGR-70G-5G-DUAL uses an 8-stream 9-in-1. Add a 7-in-1 or 11-in-1 when you also need Wi-Fi.
A single FortiGate Rugged appliance runs on the 240 W unit. Choose the 480 W unit for PoE FortiSwitch Rugged switches, or to power several rugged devices from a shared DIN rail.
Only the cellular models: the FGR-60F-3G4G, FGR-70F-3G4G, FGR-50G-5G and FGR-70G-5G-DUAL. These connect to a 5G/LTE network and require a ruggedized external antenna. The base non-cellular models (FGR-60F, FGR-70F and FGR-70G) use internal radios and do not need one.
The FGR-60F-3G4G and FGR-70F-3G4G use the FANT-3IN1-RND-5M. The FGR-50G-5G uses the FANT-5IN1-RND-5M or FANT-5IN1-RCT-5M. The dual-modem FGR-70G-5G-DUAL uses two 5-in-1 antennas or the 8-stream FANT-9IN1-RCT-5M. Add a 7-in-1 or 11-in-1 model when you also need Wi-Fi. See the compatibility table above.
Both deliver the same 5G/LTE and GNSS performance. Round (RND) antennas are IP67-rated and made for vehicle rooftops and pole mounts. Rectangular (RCT) antennas are hardened to IP69K / IK10 or IP67 / IK08 for fixed outdoor and industrial surfaces where impact and high-pressure washdown resistance matter.
Yes. Every FANT antenna includes an active GNSS element (GPS, GLONASS, BeiDou and Galileo) for location positioning alongside the 5G/4G LTE MIMO elements. The 7-in-1 and 11-in-1 models add two dedicated Wi-Fi elements (RP-SMA) for combined cellular and Wi-Fi sites.
Both are ultra-slim, convection-cooled DIN-rail supplies with the same 54 V output and universal 90-264 VAC / 106-300 VDC input. The 240 W unit delivers up to 5 A for a single rugged appliance; the 480 W unit delivers up to 10 A for PoE FortiSwitch Rugged models or several devices on one rail. Both ship as a pack of 2 units.
Yes. The DIN-rail rugged power supplies support a universal AC input with full-load operation up to 60 C and a cold start down to -40 C. They are CB-certified for worldwide use with conformal coating against dust and pollutants, plus overvoltage, overload, overcurrent, over-temperature and short-circuit protection.
Yes. We supply genuine Fortinet ruggedized antennas and DIN-rail power supplies as specified in the Fortinet Rugged Accessories datasheet. DataCenter360.ca is a Fortinet Select Partner and MSSP.
Yes. The DIN-rail power supplies are in stock and ship across Canada, and the ruggedized antennas are sourced to order. Send us your model and we confirm the exact part, price and lead time. Hardware ships within Canada.
Tell us your FortiGate Rugged model and site conditions. We confirm the exact antenna and DIN-rail supply, price it in your currency and arrange fast Canadian delivery.
DataCenter360.ca (Data Center 360 Inc.) is a Fortinet Select Partner and MSSP based in Ontario, Canada. FortiGate, FortiSwitch and Fortinet are trademarks of Fortinet, Inc. Specifications are drawn from the Fortinet Rugged Accessories datasheet and may change; we confirm the exact part on quote. Prices shown in your selected currency; hardware ships within Canada.
