Original price was: CAD$975.26.CAD$693.52Current price is: CAD$693.52.
A single firewall is a single point of failure. For branch offices and SMBs where downtime during a hardware failure translates directly to missed transactions, idle staff, or dropped VoIP calls, the right answer is a failover pair. The FortiGate 40F HA unit (FG-40F-HA) is purpose-built for exactly that: identical hardware to the standard FortiGate 40F, sold as the designated secondary member of an Active-Passive or Active-Active cluster, with state synchronization and failover measured in seconds.
| GE RJ45 Ports | 5 (1 x WAN, 4 x Internal) |
| Firewall Throughput | 5 Gbps |
| IPS Throughput | 1 Gbps |
| NGFW Throughput | 800 Mbps |
| Threat Protection | 600 Mbps |
| SSL Inspection | 310 Mbps |
| IPsec VPN Throughput | 4.4 Gbps |
| Concurrent Sessions | 700,000 |
| New Sessions/sec | 35,000 |
| Firewall Policies | 2,000 |
| High Availability | Active-Active, Active-Passive, Clustering |
| Form Factor | Desktop (1.5 x 8.5 x 6.3 in) |
| Weight | 2.2 lbs (1 kg) |
The FG-40F-HA SKU is designed to be purchased in pairs. A single HA unit has no operational advantage over the standard FG-40F; the pair is what provides redundancy. One service subscription (UTP, Enterprise, or individual FortiCare) covers both units in the HA cluster, so you do not need two separate licenses. If you are starting a new HA deployment, add two FG-40F-HA units to your cart along with one subscription for the pair.
Moving from the 30G to the 40F is a meaningful jump. The 40F adds a fifth Ethernet port (four LAN ports vs. two on the 30G), delivers 1 Gbps IPS throughput vs. 800 Mbps on the 30G, and supports Active-Active clustering in addition to Active-Passive HA. Threat Protection throughput climbs to 600 Mbps, making the 40F suitable for sites with ISP connections up to 600 Mbps under full inspection. Concurrent session capacity increases to 700,000, a relevant figure for environments with high NAT or VPN session counts.
Branch offices and SMBs with uptime requirements in their SLA are the primary buyers. Legal firms, financial advisors, healthcare clinics, and e-commerce warehouses often operate in environments where a router going offline for 30 minutes generates real business impact. Two FG-40F-HA units configured in Active-Passive keep the network running through a hardware failure without manual intervention. MSPs building resilient managed branch networks frequently standardize on this unit for high-criticality sites.
When throughput requirements or user count exceed the 40F capacity, the FortiGate 60F-HA (FG-60F-HA) is the natural next step. It supports higher concurrent sessions, additional LAN ports, and greater SSL inspection throughput. Both models run the same FortiOS version, so configuration migration is straightforward.
DataCenter360.ca ships the FG-40F-HA from Canadian inventory, with same-day dispatch on in-stock orders. As a Fortinet Select Partner, we carry factory-sealed units backed by the full Fortinet Canada warranty and FCP-certified pre-sales support. Whether you are pricing a two-unit HA pair, comparing licensing tiers, or planning a multi-site rollout with standardized hardware, our team can confirm configuration and quantities before you order.
Yes. High availability requires two physical units. The FG-40F-HA SKU is intended to be purchased in pairs. One unit acting alone provides no redundancy benefit; it requires a second unit to form the Active-Passive or Active-Active HA cluster.
No. A single FortiCare and FortiGuard subscription covers both units in the HA pair. You purchase one license for the primary unit, and the secondary is entitled through the HA cluster relationship. Confirm the licensing model with DataCenter360.ca before ordering if you are unsure.
The hardware is identical. The FG-40F-HA SKU signals intent: it is sold for HA pair deployments. In practice both units can be used interchangeably, but Fortinet documentation and licensing treat the HA unit as the secondary member of a pair.
No. This listing is hardware only. A FortiCare subscription and at least one FortiGuard service are required for the HA pair. License options for the FortiGate 40F, such as FC-10-0040F-950-02-12 (UTP) or FC-10-0040F-809-02-12 (Enterprise), are available separately on DataCenter360.ca.
Yes. DataCenter360.ca holds Canadian inventory and ships free to all provinces in 0 to 1 business days. This hardware listing is for Canadian deployments only and is not available for international export through this store.
| Weight | 1.81 kg |
|---|---|
| Manufacturer | Fortinet |
| Model | FortiGate-40F |
| GTIN | 195875409826 |
| Product Type | |
| Product Group | |
| End of Order Date (EOO) | Not published yet |
| Last Service Extension Date (LSED) | Not published yet |
| End of Support Date (EOS) | Not published yet |
| Product Family | FG-10 to FG-100 |
| MPN | FG-40F-HA |
| 5 star | 0% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Sorry, no reviews match your current selections
