Fortinet FortiSwitch 424E-FPOE 24-Port Full PoE+ Switch 421W (FS-424E-FPOE)

When your floor plan already demands wireless APs, IP cameras, and desk phones on the same switch, running a separate PoE injector for each device stops making sense. The FortiSwitch 424E-FPOE addresses that directly: 24 GE RJ45 ports all capable of 802.3af/at PoE+, a 421 W total power budget, and four 10GE SFP+ uplinks that keep the aggregation path from becoming the bottleneck. Pair it with a FortiGate running FortiLink and port-level security policy, VLAN assignment, and NAC enforcement come from the same console you already use for perimeter firewall rules.

Hardware Specifications

Where the 424E-FPOE Fits

This model is the right choice when PoE budgets matter. The 421 W total allocation can support up to 24 devices drawing standard PoE+ at 15.4 W each, or a mixed load of high-power APs, cameras, and phones drawing varying amounts across the port bank. Its full-depth chassis (410 mm) accommodates the larger power supply needed for that load, so rack placement should account for the extra depth compared to the non-PoE 424E.

In FortiLink mode the FortiGate can remotely control individual PoE port state, schedule power cycling, and monitor power draw per port as part of the Security Fabric’s health monitoring. This makes it practical to reboot a stuck AP from the FortiGate GUI without physical access to the switch closet.

FortiLink Mode vs. Standalone

The 424E-FPOE supports both deployment modes. Standalone operation gives you a full-featured managed PoE switch with 802.1X authentication, RSTP/MSTP, LACP, IGMP snooping, and DHCP snooping managed through its own CLI or HTTPS interface. FortiLink mode hands control to the connected FortiGate, which handles VLAN profiles, NAC policy, firmware distribution, and port security from one pane of glass.

Hardware-only means no included support contract. Adding FortiCare Premium (FC-10-S424F-247-02-12) gives you firmware updates, technical support, and advance hardware replacement depending on the tier.

Who Buys This Switch

Schools, hotels, SMB offices, and light industrial sites in Canada that need to power wireless infrastructure off the switch rather than adding separate PoE injectors are the primary buyers. The 24-port count fits a single floor or department, and the 421 W budget covers a full complement of dual-radio Wi-Fi 6 APs alongside a few cameras without approaching the supply limit. Organizations building Fortinet Security Fabric environments choose this specifically to keep PoE management inside FortiOS rather than adding a standalone PDU or injector closet.

Next Step Up

When 24 PoE+ ports are no longer enough, the FortiSwitch 624F-FPOE (FS-624F-FPOE) from the 600F series offers more ports and updated silicon while maintaining FortiLink compatibility. For environments that have outgrown E-generation capacity in general, the 624F-FPOE is the natural upgrade path in the Campus Secure line.

Buying from DataCenter360.ca

DataCenter360.ca stocks the FortiSwitch 424E-FPOE in Canada as an authorized Fortinet Select Partner. Orders ship free within 0 to 1 business day from Canadian inventory, brand new with Fortinet’s limited lifetime warranty. If you need to confirm PoE budget calculations for your specific device mix, or check compatibility with a FortiGate model you already own, reach out and we can help before you place the order.