48-port Gigabit access switch with four GE SFP uplinks and 104 Gbps of Layer 2/3 switching in a 1RU rack-mount chassis — data only, no PoE. FortiLink-managed by any FortiGate so wired access, wireless and security share one console. The high-density, low-power choice for floors where powered devices are handled by a separate PoE switch. Limited lifetime warranty.


The configurations most customers buy: the switch on its own, or with FortiCare support. The complete catalog is further down.
| Configuration | Price & action |
|---|---|
| FortiSwitch 248D 48-port GE switch, data only. License not included. | View productFS-248D |
Brand-new, sealed · ships same / next business day · price shown live in your selected currency.
| Support | 1 Year | 3 Years | 5 Years |
|---|---|---|---|
| FortiCare Essential Renewal only — not sold with initial hardware purchase. | View productFC-10-W248D-314-02-12 | View productFC-10-W248D-314-02-36 | View productFC-10-W248D-314-02-60 |
| FortiCare Premium 24×7 TAC, advanced hardware replacement & firmware updates. Most-purchased tier for new APs. | View productFC-10-W248D-247-02-12 | View productFC-10-W248D-247-02-36 | View productFC-10-W248D-247-02-60 |
FortiCare and subscriptions delivered electronically worldwide · prices shown live in your selected currency · add-to-cart enabled when in stock.
The FortiSwitch 248D is a 48-port Gigabit access switch for high-density wiring closets that do not need Power over Ethernet. It delivers 48 Gigabit RJ45 access ports, four GE SFP fiber uplinks, 104 Gbps of switching capacity and 155 Mpps of forwarding with Layer 2/3 FortiSwitchOS in a 1RU rack-mount chassis. Leaving PoE out has a practical payoff: the 248D draws about 39 W at full load against roughly 460 W for the PoE-equipped 248E-POE, so it is markedly cheaper to run and cool where the endpoints are desktops, printers and uplinks rather than access points and cameras. Managed over FortiLink from any FortiGate, it folds wired access into the Security Fabric — one console for switching, Wi-Fi and security, with no separate controller. It also runs standalone. Need power on the ports? The 248E-POE powers 24 ports (370 W) and the 248E-FPOE powers all 48 (740 W); both also accept the FRPS-740 redundant power supply, which the 248D does not.

A quick guide to choosing the right FortiSwitch access switch.
| Total network interfaces | 48x GE RJ45 + 4x GE SFP |
| PoE ports | None (data only) |
| PoE power budget | — |
| Switching capacity (duplex) | 104 Gbps |
| Forwarding rate (duplex) | 155 Mpps |
| MAC address table | 16 K |
| Network latency | < 1 µs |
| VLANs supported | 4 K |
| Switching | Layer 2/3 (FortiSwitchOS) |
| Management | FortiLink from any FortiGate, or standalone |
| Uplinks | 4x GE SFP |
| Form factor | 1RU rack mount |
| Dimensions | 44 x 246 x 440 mm (1.73 x 9.68 x 17.3 in), 3.54 kg (7.81 lbs) |
| Noise level | 32.3 dBA (actively cooled, side-to-side airflow) |
| Power | 100–240 V AC, 50/60 Hz, internal PSU; no redundant power option |
| Power consumption (avg / max) | 38.66 W / 39.19 W |
| Heat dissipation | 134 BTU/h |
| Operating temperature | 0°C to 50°C (32°F to 122°F) |
| Warranty | Limited lifetime |
| Security Fabric | Integrated — wired NAC, segmentation, one-console policy |
Source: official Fortinet FortiSwitch Secure Access Series datasheet (248D column).
Download the full datasheet
Every Fortinet purchase from DataCenter360.ca is backed by hands-on services across the full lifecycle — from rollout to round-the-clock protection.
The 48-port models share the same 104 Gbps Layer 2/3 platform with four GE SFP uplinks. They differ by Power over Ethernet: the data-only 248D has no PoE output, the 248E-POE powers 24 ports at 370 W, and the 248E-FPOE powers all 48 ports at 740 W.
The 248D is the 48-port data-only member of the 200-series Secure Access line. Step down to the 24-port 224E for a smaller closet, or up to the 448E for 10GE SFP+ uplinks and higher switching capacity. Same FortiSwitchOS and FortiLink management across the range.
Every available SKU for the FS-248D: switch hardware, FortiCare support and RMA services. In stock, brand new; licensing delivered electronically worldwide.
| Configuration | Price & action |
|---|---|
| FortiSwitch 248D 48-port GE switch, data only. License not included. | View productFS-248D |
Brand-new, sealed · ships same / next business day · price shown live in your selected currency.
| Support | 1 Year | 3 Years | 5 Years |
|---|---|---|---|
| FortiCare Essential Renewal only — not sold with initial hardware purchase. | View productFC-10-W248D-314-02-12 | View productFC-10-W248D-314-02-36 | View productFC-10-W248D-314-02-60 |
| FortiCare Premium 24×7 TAC, advanced hardware replacement & firmware updates. Most-purchased tier for new APs. | View productFC-10-W248D-247-02-12 | View productFC-10-W248D-247-02-36 | View productFC-10-W248D-247-02-60 |
| FortiCare Elite Priority TAC queue, quarterly review & dedicated team. | View productFC-10-W248D-284-02-12 | View productFC-10-W248D-284-02-36 | View productFC-10-W248D-284-02-60 |
| FortiCare Premium → Elite Upgrade Step an existing FortiCare Premium contract up to Elite mid-term. | View productFC-10-W248D-204-02-12 | View productFC-10-W248D-204-02-36 | View productFC-10-W248D-204-02-60 |
| RMA | 1 Year | 3 Years | 5 Years |
|---|---|---|---|
| Next-Calendar-Day RMA Replacement unit dispatched the next calendar day. | View productFC-10-W248D-210-02-12 | View productFC-10-W248D-210-02-36 | View productFC-10-W248D-210-02-60 |
| 4-Hour Delivery RMA Advance replacement delivered within 4 hours. | View productFC-10-W248D-211-02-12 | View productFC-10-W248D-211-02-36 | View productFC-10-W248D-211-02-60 |
| 4-Hour Delivery + Onsite RMA 4-hour part plus a Fortinet onsite engineer dispatched. | View productFC-10-W248D-212-02-12 | View productFC-10-W248D-212-02-36 | View productFC-10-W248D-212-02-60 |
| Secure RMA Keep your failed unit — no return of the defective AP required. | View productFC-10-W248D-301-02-12 | View productFC-10-W248D-301-02-36 | View productFC-10-W248D-301-02-60 |
FortiCare and subscriptions delivered electronically worldwide · prices shown live in your selected currency · add-to-cart enabled when in stock.
1 GbE SFP uplink transceivers for the four fiber ports. This model has no redundant power option.
No. The 248D is data only with no Power over Ethernet on any of its 48 ports. If you need to power access points, IP phones or cameras, the 248E-POE powers 24 ports (370 W) and the 248E-FPOE powers all 48 ports (740 W) on the same 48-port platform.
Yes. The plain 248D is actively sold, priced in the current Fortinet price list and not on an end-of-order schedule. The 248D-POE and 248D-FPOE are different, discontinued models — check the SKU carefully.
No. The 248D has a single internal AC supply and no redundant power option; the FRPS-740 supports the 224D-FPOE, 224E-POE, 248E-POE and 248E-FPOE, not the 248D. If redundant power in the closet is a requirement, choose one of those models.
About 38.7 W average and 39.2 W maximum, with 134 BTU/h of heat dissipation. That is roughly a tenth of the draw of the PoE-equipped 248E-POE, which is the main operating-cost argument for a data-only switch.
Over FortiLink from any FortiGate firewall, so switching, Wi-Fi and security are managed in one console with no separate controller. It also runs standalone, with Layer 2/3 routing on board.